Description
MODEL: DWMT 8104
Introduction :
- The module temperature sensor is used by PV plant operators to know the temperature of the modules installed in the array.
- The module temperature sensor converts this reading into a voltage signal.
- This signal is sent back to the monitoring device.
- As the system operator it’s important to know the systems’ performance.
- The module temperature sensor will help to enhance kWh performance by ensuring reliable access to the all necessary data.
Features
- Fast, Stable and accurate
- IP65 enclosure Excellent long term stability
- Onsite two point calibration
- Loop powered Calibration
- If using Modbus sensor then the PV Module Temperature Sensor is factory calibrated.
- If using analog output senor then use the following info to calibrate:
- Output – 0 to 5 VDC (-40 to 100 deg C)
- If the cable length is insufficient for the installation, additional cable can be added to the existing cable. If this is done, an accuracy de-rating factor must be added to the overall temperature accuracy of this sensor.
Reviews
There are no reviews yet.