Davis Wind Speed and Direction Sensor (Anemometer)
Specification
- 0 to 360 deg
- 6410
- Black
- Davis
- Wind Speed –Â Wind cups and magnetic switch
- Wind Direction – Wind vane and potentiometer
- Attached Cable Length – 40′ (12 m)
- Cable Type – 4-conductor, 26 AWG
- Connector – Modular connector (RJ-11)
- Recommended Maximum Cable Length Wizard and Monitor – 140′ (42 m) Sensor to Console Material
- Wind Vane and Control Head – UV-resistant ABS
- Wind Cups – Polycarbonate
- Anemometer Arm – Black-anodized aluminum
- Dimensions – 18.5″ long x 7.5″ high x 4.75″ wide (470 mm x 191 mm x 121 mm)
- Weight – 2 lbs. 15 oz. (1.332 kg)
Introduction
- The Anemometer includes both wind speed and wind direction sensors.
- Rugged components stand up to hurricane-force winds, yet are sensitive to a light breeze.
- Includes sealed stainless-steel bearings for long life.
- The range and accuracy specifications of this unit have been verified in wind-tunnel tests (information available upon request).
- A model 7911 Anemometer reported wind speeds of 175 miles per hour before its tower collapsed during hurricane Andrew, 1992.
- Digital filtering, with time constant as specified below, is applied to wind direction measurements.
- In areas where icing of the anemometer is a problem, use Anemometer Drip Rings to deflect water from the joint between moving parts.
Additional information
| Weight | 2000 g |
|---|---|
| Dimensions | 20 × 10 × 5 cm |
| Sensor Output | 4-20mA, 0-5 V, Modbus RS485, Modbus RS232 |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.