TrackSo AeroCone Rain Gauge Modbus

Description

• The Rain Collector is designed to meet the guidelines of the World Meteorological Organization.
• Rain enters the collector cone, passes through a debris-filtering screen, and collects in one chamber of the tipping bucket.
• The bucket tips when it has collected an amount of water equal to the increment in which the collector measures (0.01″ or 0.2 mm).
• As the bucket tips, it causes a switch closure and brings the second tipping bucket chamber into position.
• The rain water drains out through the screened drains in the base of the collector.
• The collector is designed for years of accurate, trouble-free service.
• The shape is aerodynamically designed to minimize rainfall catch reduction caused by high winds.
• The body and base of the collector are constructed of tough, UV resistant plastic; the tipping bucket pivots on bearings that minimize friction and wear.
• Stainless steel adjustment screws under each chamber of the tipping bucket allow you to fine-tune the calibration of the Rain Collector.