Data Logger: TrackSo 4G-Lite WT-410M RS485 with Wind Speed Sensor 4-20mA With One Year of Data Monitoring Charge

Description

SRAM 32 Kbytes
Flash Memory 256 Kbytes
Data Log Flash Memory 64MB ( 17,000 Offline Records)
WDT (watchdog) Yes
Modem LTE
LTE FDD: Max 150Mbps (DL)/Max 50Mbps (UL)
LTE TDD: Max 130Mbps (DL)/Max 30Mbps (UL)
UMTS
DC-HSDPA: Max 42Mbps (DL)
HSUPA: Max 5.76Mbps (UL)
WCDMA: Max 384Kbps (DL)/Max 384Kbps (UL)
GPRS/EDGE
EDGE: Max 296Kbps (DL)/Max 236.8Kbps (UL)
GPRS: Max 107Kbps (DL)/Max 85.6Kbps (UL)
Transmitting Power
Class 3 (23dBm±2dB) for LTE FDD
Class 3 (23dBm±2dB) for LTE TDD
Class E2 (27dBm±3dB) for EDGE 900MHz
Class E2 (26dBm±3dB) for EDGE 1800MHz
Class 4 (33dBm±2dB) for EGSM900
Class 1 (30dBm±2dB) for DCS1800
Serial ports
RS232 Utility port
RS-232: TxD, RxD, GND (used for device configuration and debugging)
RS485 1 x RS-485 used for communication with the slave device
Slaves Upto 8
Baud Rate Supports: 2400, 4800, 9600, 19200, 38400, 57600, 115200
I/O Port (Optional) Analog Inputs
2 x Voltage Measurement (DC): 0-10 V
1 x Current Measurement (DC): 4 -20 mA
Power Operating Voltage 12VDC to 24VDC
Mechanical Casing Plastic Casing
Degree of Protection lP 20 (Indoor)
Dimensions (W x L x H) 85mm x 100mm x 30mm
Installation Wall Mounting
Environmental Operating Temperature -25 ℃ to +55 ℃
Ambient Relative Humidity 5 ~ 95% RH, non-condensing

Wind Speed Sensor

Introduction
Wind Speed Sensor is designed with rugged components that stand up to hurricane‐force wind yet are sensitive to a light
breeze. It includes sealed bearings for long life. The range and accuracy specifications have been verified in wind‐tunnel
tests. In areas where the icing of the anemometer is a problem, drip rings deflect water from the joint between moving
parts.
Theory of Operation
The sensor’s cup assembly consists of three cups mounted on a cup assembly hub. A shaft, which rotates on precision-
sealed ball bearings connect the cup assembly to a magnet assembly. When the shaft is rotated, the turning magnet
assembly causes a reed switch to close. It closes twice for every rotation of the shaft. The pulses produced by this
the closure is counted by the connected electronics

Sensor Type Three cups
Material Control Head UV-resistant ABS
Wind Cups Polycarbonate
Range 0 to 250 km/hr
Startup wind speed 0.5 m/s or 1.8 km/hr
Accuracy ± 5%
Outputs A, B, C, and D are 4 different models
A. 0 – 5 VDC
B. 4 – 20 mA
C. MODBUS RTU-RS485
D. Pulse, 62 Hz = 250 km/hr
Dimensions 3 cup dia. 15 cm
Operating Temperature – 40 ~ 75 ° C
Potential lead  Two wires
Sensor Cable Length  2m

1 Year License for Data Logging

Data Logger: https://trackso.in/wp-content/uploads/documents/2019/04/Datasheet-TrackSo-ADVANCED-4G-Lite-RS485-DL.pdf

Wind Speed Sensor: https://trackso.in/wp-content/uploads/documents/2019/04/TrackSo-Datasheet-Installation-Guide-Wind-Speed-Sensor-WS102.pdf

*Note – Once one year is exhausted it. The customer needs to connect with TrackSo Sales Team. Shipping charges for Indian States only. In case Export is required please connect with sales@trackso.in